Navigon 70 plus live User Manual page 103

It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In the N
2. Set the values for Brightness Day and Brightness Night as low as
possible.
3. Tap on OK.
4. Tap on
The N
I have accidentally activated demo mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. In the N
The S
2. Tap on Options > Stop Demo Mode.
You will be prompted to confirm that you want the device reset to
the as-delivered state.
3. Tap on the Yes button.
The software is re-started and behaves as if started for the first time
after being purchased (refer to "Switching on the navigation device"
on page 16).
Start the navigation software and set the Start in Demo Mode
setting to No (refer to "Starting the navigation application" on
page 25).
The proximity sensor is very late in responding to my hand. I have to
nearly touch the screen of the navigation device.
The reaction radius of the proximity sensor may be reduced under the
following conditions:
The navigation device is not connected to an external power supply.
►
You are using a charging cable that is not recommended by
►
NAVIGON expressly for your navigation system.
You are holding the navigation device in your hand.
►
You are using a cradle which is not the original cradle.
►
The navigation device is not mounted on the windscreen but in a
►
different place.
You are using an accessory that is not recommended by NAVIGON
►
expressly for your navigation system.
Troubleshooting
window tap on Options > Settings > General.
AVIGATION
(Back).
window is now open again.
AVIGATION
window, tap on Options > Settings.
AVIGATION
window is opened.
ETTINGS
User's manual NAVIGON 70 Easy | 70 Plus Live
- 103 -