Navigation In Track Mode; Navigation In Offroad Mode - Navigon 70 plus live User Manual

Recalculate route: Recalculates the route. Use this function if you have
wandered far from the calculated route and would like a new route
proposal.
7.6.3

Navigation in Track mode

This mode becomes active if you have planned a route with a track for
the navigation (refer to "Tracks and multi-leg routes" on page 42).
After the route was shown in Preview mode, navigation was started.
First the navigation guides you from your current location to the
beginning of the loaded track. This navigation corresponds to the
navigation of the selected route profile (refer to "Navigation in Vehicle
mode" on page 57 and to "Navigation in Pedestrian mode" on page 61).
As soon as the first recorded point of the track is reached, the
navigation switches to Track mode.
Navigation in Track mode works like navigation in Pedestrian mode
(refer to "Navigation in Pedestrian mode" on page 61).
There are only a few differences:
The Recalculate route function is not available.
►
If more route points follow after the track, the navigation will switch
►
back to the originally selected mode.
7.6.4

Navigation in Offroad mode

Note: This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
Nor does it become active if you are navigating along a track (refer to
"Navigation in Track mode" on page 63).
If you enter a destination which lies off the digitalised road system, the
navigation will guide you first in Vehicle mode to the point of the
digitalised road system that lies nearest to the destination. From here
the navigation then continues in Offroad mode.
If the current position at the beginning of navigation lies off the
digitalised road system, the navigation will guide you first in Offroad
mode to the nearest point of the digitalised road system. From here the
navigation then continues in Vehicle mode.
Navigation in Offroad mode works like navigation in Pedestrian mode
(refer to "Navigation in Pedestrian mode" on page 61).
There are only a few differences:
The part of the route already covered is not shown.
►
The Recalculate route function is not available.
►
Working with the map
User's manual NAVIGON 70 Easy | 70 Plus Live
(Pedestrian) symbol.
- 63 -