Refrigerator Doors - GE Profile 200D8074P017 Owners And Installation Manual

About the refrigerator doors.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
7/16 Wrench
Raise
Screw down the support
leg until it touches the
floor. This will prevent
door misalignment.
12

Refrigerator Doors

The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.
When opening and closing the door you
will notice a stop position. If the door is
opened past this stop point, the door will
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
Door Alignment
If doors are uneven, adjust the refrigerator
door.
Using a 7/16 wrench, turn the door
adjusting screw to the right to raise the
door, to the left to lower it. (A nylon
plug, imbedded in the threads of the
pin, prevents the pin from turning
unless a wrench is used.)
Support Leg
Before moving the refrigerator, you will
need to screw up the support leg. Once the
unit is relocated, you will need to screw
down the support leg again.
The resistance you feel at the stop
position will be reduced as the door
is loaded with food.
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.