GE Profile 200D8074P017 Owners And Installation Manual page 31

SET THE SUPPORT LEG
7
Screw down the support leg until it
touches the floor. This will prevent door
misalignment.
REPLACE THE BASE GRILLE
8
Replace the grille by installing the two
Phillips head screws.
Installation Instructions
31
SET THE CONTROLS
9
Set the controls to the recommended
setting.
START THE ICEMAKER
10
Set the icemaker power switch to the
I (on) position. The icemaker will not
begin to operate until it reaches its
operating temperature of 15°F (–9°C)
or below. It will then begin operation
automatically. It will take 2–3 days to
fill the ice bin.
Power
switch
NOTE:
In lower water pressure conditions, the
water valve may turn on up to 3 times
to deliver enough water to the icemaker.