Additional Features; Refrigerator Doors - GE 23 Series Owner's Manual And Installation Instructions

About the additional features.
Not all features are on all models.
1
2
About the refrigerator doors.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
7/16" Socket Wrench
To remove the base
grille, open the doors,
remove the screw at
each end of the base
grille and then pull
the grille straight out.
12
Removable Beverage Rack
The beverage rack is designed to hold
a bottle on its side. It can be attached to
any slide-out shelf.

Refrigerator Doors

The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.
When opening and closing the door you
will notice a stop position. If the door is
opened past this stop point, the door will
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
Door Alignment
If doors are uneven, adjust the refrigerator
door.
Using a 7/16" socket wrench, turn the
door adjusting screw to the right to
raise the door, to the left to lower it.
(A nylon plug, imbedded in the
threads of the pin, prevents the pin
from turning unless a wrench is used.)
Raise
To install:
Line up the large part of the slots on
the top of the rack with the tabs under
the shelf.
Then slide the rack back to lock it
in place.
The resistance you feel at the stop
position will be reduced as the door
is loaded with food.
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.