GE Profile 200D8074P017 Owners And Installation Manual page 22

Inserting the door panels.
Top Trim
Side
Trim
Side
Trim
Bottom Trim
22
Install the Side Trim.
Side trim pieces are tucked inside
the refrigerator door handle.
Do not remove the protective film on
the outside of the Side Trim until
it is installed.
1. Insert the side trim under
the top trim.
Insert the side
trim to the top
trim as arrow
shows.
Once you insert the side trim
under the top trim, make sure
there is no gap between the side
trim and the top trim looking
from the front of the refrigerator.
2. Hold the side trim against
the side door.
Make sure the side trim is aligned
to the door during installation.
Some side trims have pieces of
adhesive tape. If so, peel off the
backing so the tape can be attached
during trim installation.
3. Insert the side trim to the bottom
trim or bottom panel.
Insert the side trim
to the bottom trim
as arrow shows.
Once you insert the side trim
under the bottom trim or panel,
the side trim will fit to the door.