User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
3
Switching on the navigation device
The navigation device can be in one of three states:
On: The navigation device is on and can be operated.
►
Standby: When you switch the navigation device to standby mode,
►
the next time it is switched on it will start very quickly and with the
window which was active when switched off. In standby mode the
device still consumes a small amount of energy however.
Depending on how full the battery is, it can become flat within a few
days or a few weeks.
Off: When you switch off the device, it consumes hardly any
►
energy. It can then take several months for the battery to become
flat. Switching the device on again triggers a restart which can take
some time (approx. 60 seconds). Your settings and your saved
destinations and routes will be retained.
3.1
Switching on the device
Press the
►
switches on.
The N
3.2
Switching the navigation device to standby
mode
Press briefly on the
►
A message will appear telling you that the device will be switched to
standby mode in several seconds.
Wait for the device to be switched to standby mode or tap on
►
Standby.
Automatic Standby
You can configure the navigation device so that it is automatically
switched to standby mode when not in use.
In the N
►
Settings > Power and Screen > Automatic Standby.
Select after how much time you want the navigation device to be
►
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
- 16 -
(On/Off) key and keep it pressed until the device
window opens.
AVIGATION
(On/Off) key (max. 1 second).
window tap on
AVIGATION
(More) > System
Switching on the navigation device