Navigon 72 easy User Manual page 32

User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
►
Note: You can define and change the order in the N
under
Address Data.
Please note however that the Street First order of entry is not possible
for all countries. If the map of the selected country does not support
both modes, you must enter the town first.
Note: The following description is based on City First as the order for
entering the address.
The C
1. Enter the name or the postal code of the destination town.
2. Enter the name of the destination street.
►
3. Enter the house number. If you do not know the house number,
then leave this box empty.
If you don't know the house number but know the name of a nearby
side street, then tap in the N
Cross Street and enter this name. The navigation system will
calculate a route to the intersection of the streets you have entered.
The D
4. Tap on Start in order to navigate to the stipulated address.
- or -
Tap on
park near your destination.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
►
- 32 -
Select the order of entry you want (Street First or City First). If
you would like to save this setting permanently and without
being asked again, first activate the checkbox alongside 'Use
these settings in future for address information'.
(More) > Navigation Settings > General > Input Mode for
window opens.
ITY
If you enter an address in the Czech Republic or in Russia and
have selected the corresponding map, you can also enter the
land register number instead of the street name.
In the S window tap on
TREET
Point and enter the land register number.
The navigation system will then calculate a route to this
address.
window opens.
ESTINATION
(Parking) in order to search for and navigate to a car
Tap on the address to which you want to navigate.
(More) > Enter Address
. window on
O
window
AVIGATION
(More) > Enter
Navigation