Navigon 72 easy User Manual page 18

User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
9. Read the text in this window very carefully. It describes the settings
which you can make for the add-on.
10. Tap on OK.
The W
11. Select the setting you want.
12. Tap on OK.
►
►
Note: If you deinstall NAVIGON Safety Camera, the add-on can be
installed again only by using the NAVIGON Fresh software.
The P
Presentation mode is intended solely for presenting the product
when no GPS reception is possible.
When presentation mode is active, navigation is not possible.
Presentation mode is designed solely to simulate navigation to the
centre of the indicated destination.
13. Make sure that the Start in Presentation Mode checkbox is not
activated. If necessary, tap on the checkbox in order to set the
value Yes (
activated).
14. Tap on OK.
Note: How to deactivate presentation mode is explained in
"Troubleshooting" in section "I have accidentally activated presentation
mode" on page 126).
There then follows a series of pictures which demonstrate the basic
operations of the navigation device.
You can use the
button to switch between the other pictures.
15. Look at all the pictures.
- or -
Tap on Done.
►
Note: In the N
Introduction if you want to see the introduction again later.
A window with the following message opens:
- 18 -
S
ARN OF AFETY
If you have selected the Uninstall option, you will be asked to
confirm the deinstallation of the add-on.
Tap on Yes.
M
RESENTATION ODE
checkbox activated) to No (
windw tap on
AVIGATION
C window opens.
AMERAS
window opens.
(Next) button and the
Using the Navigation System for the First Time
checkbox not
(Back)
(More) > Show