Navigon 72 easy User Manual page 22

User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
The TMC symbol can display the following TMC reception status:
Tuning (in red): The TMC receiver is operational but cannot find a
transmitter that is sending TCM signals. There are no active traffic
messages.
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby (in white): Traffic messages can be received.
Note: The TMC antenna is integrated in the car charger cable. The
Tuning symbol may still appear therefore when the car charger cable is
not connected to the navigation device.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 78.
Traffic Live
This section is relevant for you only if your navigation device is a
NAVIGON 72 Plus Live.
You can draw traffic information either from the NAVIGON Live
services (Traffic Live) or from radio stations (TMC). (Refer to
"Configuring the NAVIGON Live services" on page 115.)
The Traffic Live symbol appears when you are drawing traffic
information from the NAVIGON Live service.
The Traffic Live symbol can indicate the following traffic information
reception states:
(Red) Connecting: The last attempt to call up traffic information from
the NAVIGON Live server failed. This can be the case, for example,
when travelling through a tunnel. Information which was called up
previously may still be active however.
(White) Traffic Live Ready: Traffic information was called up
successfully. The active information is up to date.
Muting
The Muting symbol can indicate the following states:
No symbol: The navigation application is not muted.
Muting: The navigation application is muted. If the device is navigating
at the moment, you will not hear any driving instructions.
- 22 - Operating the navigation system