Switching On The Navigation Device - Navigon 40 essential User Manual

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
3

Switching on the navigation device

Press the
►
switches on.
The N
Note: The screen lights up briefly in white, indicating that you have
started the device.
When you switch on the navigation system for the first time, you will be
asked to make the following settings:
your preferred language for using for the software
►
the unit of length for distances
►
the time format
►
the date format
►
Note: When you start the navigation application for the first time, the
D
EMO
Demo mode is intended only for demonstrating the product when no
GPS reception is possible.
When demo mode is active, navigation is not possible! Demo mode
is designed solely to simulate navigation to the centre of the
indicated destination.
►
►
Note: How to deactivate demo mode is explained in "Troubleshooting"
in section "I have accidentally activated demo mode" on page 121.
Note: If you have not used the navigation device for a long time, the
battery may be flat.
When you connect the navigation device to the supplied car charger
cable, it can be switched on immediately even if the battery is flat. If you
use a different charger cable or have connected your device to a PC, it
may need charging for a few minutes before it can be switched on.
Chargers and other accessories are available in the NAVIGON online
shop at
- 18 -
(On/Off) key and keep it pressed until the device
window opens.
AVIGATION
M settings window opens.
ODE
Make sure that the Start in Demo Mode setting is at No. If
necessary tap on the
the setting from Yes to No.
Tap on OK.
www.navigon.com
(Toggle) button in order to change
or in specialist stores.
Switching on the navigation device