Navigon 72 easy User Manual page 43

In the N
Settings > General. Under Activate MyRoutes select whether you want
the MyRoutes function to be available or not (Yes or No).
Start
Tap on the button of the route which you want to use for the
►
navigation.
If you have selected the value On Request for the Route Optimisation
setting, then you may be notified of traffic incidents before the
navigation starts (see "Route Optimisation: On Request" on page 78).
Simulating the navigation
You can also simply simulate the navigation from your current position
to a selected destination point.
Note: GPS reception must be good enough to determine your current
position.
Note: When simulation is in progress, the
instead of the GPS symbol (see "GPS" on page 20).
You have entered a destination. The route has been calculated. The
map is open in Route preview mode.
1. Tap on
►
2. Tap on the button of the route on which you want to simulate the
navigation.
For more details about the MyRoutes function refer to the chapter
"MyRoutes" on page 42.
Stopping the simulation
Simulation is ended in the same way as navigation:
1. Tap on the map to open the button bar.
2. In the button bar tap on
3. Tap on Stop Simulation.
Navigation
User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
window tap on
AVIGATION
(More) > Simulation.
If the MyRoutes function has been activated, you will be
prompted to select a route for the simulation.
(Navigation).
(More) > Navigation
symbol will appear
(Navigation Options) or
- 43 -