5
6
7
If a paper jam occurs while the Booklet mode was set and the machine was using the Saddle
Finisher-G1, a screen similar to the one shown below appears on the touch panel display.
Check where the jam occurred, and follow the procedure described below and the procedure
that appears on the touch panel display, to remove the jammed paper.
7-54
Saddle Finisher-G1/Puncher Unit-K1
CAUTION
•
When closing the cover, be careful not to get your fingers caught, as this may result
in personal injury.
Connect the finisher to the main unit.
CAUTION
•
When returning the finisher to its original position, be careful not to get your fingers
caught, as this may result in personal injury.
Follow the instructions on the touch panel display.
NOTE
•