Oce OP33 Reference Manual page 281

CAUTION
•
If you open the front cover of the main unit while the front cover of the Finisher-J1 is open,
the front cover of the finisher may close. Take care, as this may result in injury.
The Finisher-J1 is equipped with the following functions:
I Collate Mode
This function automatically collates print sets into page order before they are delivered.
I Group Mode
This function outputs all prints of the same page in one set, and slightly shifts the output
position of print sets to make them easier to handle.
NOTE
•
I Offset Mode
This function outputs paper shifted to the front.
NOTE
•
I Staple Mode
This function automatically collates print sets into page order, staples the sets, and
outputs them.
CAUTION
•
Do not place your hand in the part of the tray where stapling is performed while a finisher
is attached, as this may result in personal injury.
7
Finisher-J1 7-35