Oce OP33 Reference Manual page 153

2
3
3
If the service call message containing an error code shown below appears, be sure to turn
the main power switch ON again. After that, if the same message appears when paper is
output, contact your service representative. Follow the procedure shown below if the service
representative asks you to set Staple/Offset to ON/OFF.
• E000500-000
• E000514-000
• E000530-000
• E000531-000
• E000577-000
• E000580-000
• E000585-000
NOTE
•
•
3-42 Adjusting the Machine (Adjustment/Cleaning)
Press "Light" or "Dark" to adjust the exposure, and press "OK."
Press "Done."
The specified mode is set and the display returns to the Basic Features screen.