Oce OP33 Reference Manual page 147

2
3
3
This machine enters the Quiet mode after a specified amount of time has elapsed following a
print job or after a key has been pressed. On this screen you can specify the amount of time
that must be taken before entering the Quiet mode.
NOTE
•
1
3-36 Setting the Timer (Timer Settings)
Enter the desired time period using "–" or "+," and press "OK."
Press "Done."
The specified mode is set and the display returns to the Basic Features screen.
Call up the desired screen as follows:
(Additional Functions)
-
Time Until Unit Quiets Down