Oce OP33 Reference Manual page 132

1
Call up the desired screen as follows:
(Additional Functions)
2
Select the functions of dedicated output trays A, B, and C, and press
"OK."
When the Saddle Finisher-G1 is
attached
IMPORTANT
•
NOTE
•
•
•
•
•
3
Press "Done."
The specified mode is set and the display returns to the Basic Features screen.
Setting Specifications That Are Common to Each Function (Common Settings)
Tray Designation
When the Inner 2way Tray-A1 is
attached
3
3-21