Operation - Docking - Havis DS-PAN-110 Series Owner's Manual

Operation - Docking

• DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER'S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
• DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE,
CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
1). Ensure Docking Station is unlatched by positioning the Latch Handle
to the "UNDOCK" position.
2). With rear of computer elevated, load front of computer into Docking Station
by aligning Front Hook with the appropriate recess in the computer case.
3). Lower back of computer onto Brass Locator Pins.
4). Apply light downward pressure over rear of computer as indicated by
Arrow A and rotate Latch Handle counter-clockwise to the "DOCK" position.
7
www.havis.com • 1-800-524-9900