Advertisement
ZIC360NX
GE Monogram
Dimensions and Installation Information (in inches)
Customization Basics: Framed or Overlay Panels,
Custom Handles and Accessory Kits
These bottom-freezer refrigerators are factory set for a left
or right door swing. The door swing is NOT reversible. Choose
an RH model with hinge on the right side; the door swings
left to right. Choose an LH model with hinge on the left side;
the door will swing right to left.
Trimmed Refrigerators
ZIC360NXLH, ZIC360NXRH
Trimmed refrigerators are designed to be customized with
decorative panels. Field-installed custom door and grille
panels are required.
Framed Panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panel or accessory panel
slides into the factory-installed trim.
Standard Door Handle
Standard supplied handles shown in 1/4" panel position.
Overlay Panels
You may also choose to install custom overlay panels from
729Dia65
your cabinet manufacturer. This design provides a seamless
appearance which integrates smoothly with surrounding
cabinetry.
Standard
Door Handle
Standard supplied handles shown in 3/4" overlay panel position.
For answers to your Monogram,
696Dia9
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
36" Built-In Side-by-Side Refrigerator
®
Framed Panel
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
GE Profile
or
®
™
service,
®
Door Swing
Left-Hand
Door Swing
Door Handles
The supplied handles can be adjusted to accommodate both
framed or overlay panels. Custom handles of your choice,
supplied by your cabinetmaker, can also be installed. If
605Dia2 6
desired, you may order ZKHCSS2 Monogram
Tubular Handle Kit for overlay panels.
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
Optional Accessory Kits
ZKHCSS2: Monogram Stainless Steel Tubular Handle Kit and
Handle Side Trim for custom handles. For use on 3/4" custom
panels.
ZUG2: For side-by-side installation of two trimmed bottom-
freezer refrigerators. This kit provides for the installation of
a unified custom grille panel to span the width of two units
using a framed or overlay panel.
ZUGSS2: For side-by-side installation of two stainless steel-
wrapped bottom-freezer refrigerators. This kit provides a
unified stainless steel grille panel to span the width of two
units.
Accessory Panels
Black acrylic and stainless steel accessory panels are
available from your Monogram supplier. Panels are cut to
size and ready to install. These panel kits must be ordered
separately.
Black
Stainless Steel
ZPBC360
ZPSC360
Specification Created 6/08
Right-Hand
Stainless Steel
®
Listed by
Underwriters
Laboratories
110112
Advertisement
