Advertisement
ZIC360NX
GE Monogram
Dimensions and Installation Information (in inches)
1/4" Framed Panel Dimensions
If you choose to install framed
panels, they must be cut to the
dimensions shown. The panels
will slide into the frame on the
door, drawer and grille.
If the custom panel is less than
1/4" thick, and it fits loosely
in the door frame, it can be
backed up with a piece of
filler material or foam tape to
improve the fit.
Important Note: Maximum
weight for fresh food panel is 50
pounds, 30 pounds for freezer
drawer panel and 11 pounds for
the grille panel.
A
Grille Panel
B
Fresh Food
C
Panel
Freezer Drawer
D
Panel
Framed Panel Dimensions (in inches)
A (Width) B (Grille Ht.) C (FF Ht.) D (FZ Ht.)
1/4" Framed Panel 33-7/8
3/4" Overlay Panel Dimensions (in inches)
729Dia89
A (Width) B (Grille Ht.) C (FF Ht.) D (FZ Ht.)
1/4" Backer Panel 33-7/8
.10" Spacer Panel 32-1/2
3/4" Overlay Panel 34-1/8
For answers to your Monogram,
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
36" Built-In Side-by-Side Refrigerator
®
Door/
Drawer
729Dia84
8-7/8
46-1/16
8-7/8
46-1/16
7-5/8
44-11/16 20-1/2
9
46-5/16
GE Profile
or
®
™
service,
®
3/4" Overlay Panel Dimensions
For a more custom appearance,
overlay panels may be installed
5/16"
on trimmed models. The overlay
Trim
panel must be secured to a 1/4"-
Reveal
thick backer panel which slides
into the trim. A spacer panel 0.10"
thick must be placed between the
1/4"
overlay and backer panel.
Panel
.250" + .10" + .750" =
1.100" Total Panel Thickness
Center each panel
over the other.
Assemble the
panels with glue
and screws. Screws
must be counter-
sunk into the backer
panel.
NOTE: Left-to-right offset is not always equal to top-to-
bottom offset.
ZUG2 Grille Panel Dimensions
The ZUG2 Unified Grille Panel Kit will accept a framed or
overlay grille panel.
• Assemble the overlay panel in the same manner as the
door and drawer panels.
Framed Panel Dimensions
21-7/8
1/4" Framed Panel 69-7/8"
729Dia85
21-7/8
Overlay Panel Dimensions
22
1/4" Backer Panel
.10" Spacer Panel
3/4" Overlay Panel 70-1/8"
Door/
Drawer
1/4"
Backer
Panel
Overlay Panel
729Dia42
605Dia15
A
Grille Panel
A (Width)
B (Height)
8-7/8"
A (Width)
B (Height)
69-7/8"
8-7/8"
68-1/2"
7-5/8"
9"
Specification Created 6/08
Overlay
Panel
.10"
Spacer
Spacer Panel
Backer Panel
B
Listed by
Underwriters
Laboratories
110112
Advertisement
