Miele H 357 Operating Instructions Manual page 29

Below is an example of setting a simple
programme.
To bake a cake using Fan heat D,
150 °C.
Place the cake in the oven and close
the door.
Turn the programme selector to the
Fan D position.
The following will appear in the display:
– the recommended pre-set tempera-
ture of 160° C,
– the symbols of any function that can
be altered from this programme se-
lector position.
As soon as triangle V starts to flash
underneath the temperature symbol,
use the (–/+) input dial to reduce the
temperature to 150°.
Once this setting has been accepted
– the
will be displayed,
– and the oven heating will switch on,
– together with the cooling fan.
Take the cake out of the oven when it is
ready.
Turn the programme selector to "0".
The
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit. When
the temperature in the oven has fallen
sufficiently the cooling fan will switch
off automatically. The oven will cool
down faster if the door is left partially or
fully open.
in the oven
will continue to run for
29