Setting Sds Remote Control; Setup; Ring Style; Setting Ring Style - Motorola MTM800 E Feature User Manual

capable of controlling other radios. During the execution of the Remote Control messages, depending on your service
provider settings, the radio can play a tone, vibrate, or display an appropriate icon in the status icon area.
Note: This is a selling feature.

Setting SDS Remote Control

When and where to use: To enable/disable support of special SDS messages that allow remote control of the radio.
Procedure:
1 From the home screen, press the
2 Select Security → Remote Control.
3 Select On to enable, or Off to disable remote control.

Setup

This sub-menu allows you to change your radio configuration.

Ring Style

This sub-menu allows you to set the incoming call ring style.

Setting Ring Style

Procedure:
1 From the home screen, press the
2 Select Setup → Ring Style.
3 Select one of the following:
• Duplex — To set the new ring style to all duplex calls.
• Simplex — To set the new ring style to all simplex calls.
Note: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
Note: New ring style is played immediately for a few seconds. If necessary, adjust the volume level.

Set Volume

This menu item allows you to adjust the Simplex, Duplex, Earpiece, Speaker, and Keypad tone volume.
Related Links
Volume Adjustment Mode

Setting Volume

Procedure:
1 From the home screen, press the
2 Select Setup → Set Volume.
3 Select one of the following:
key.
MENU
key.
MENU
on page 73
key.
MENU
Main Menu | 71
| | Send Feedback