Wakeup Event Detect - Mach P4MST-890 Setup Manual

WDRT Support
This option allows you to disabled or enables the Watchdog Timer.
The Choices: Enabled (default), Disabled.
WDRT Run/Stop
This option allows you to select the mode of Watchdog Timer.
The Choices: Stop (default), Run.
WDRT Count
This option allows you to control the count of the Watchdog Timer.
The Choices: 1023 (default); min=0, amx=1023, key in a DEC number.

Wakeup Event Detect

Figure 6.1:IRQ/Event Activity Detect
Highlight the "Press Enter" label next to the " IRQ/Event Activity Detect" label
and press the enter key will take you a submenu with the following options:
P4MST-890
30