Instructions - Russell Hobbs 18534-70 Instructions Manual

Hide thumbs Also See for 18534-70:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging, but keep it till you know the appliance works.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don't put the kettle, stand, cable, or plug in any liquid; don't use the kettle in a
bathroom, near water, or outdoors.
3 Don't touch hot surfaces.
4 Don't open the lid while the water is heating.
5 Keep the kettle, stand, and cable away from the edges of worktops and out of reach of
children.
6 Put the stand on a stable, level surface.
7 Unplug the stand when not in use, before moving and before cleaning.
8 Don't use the kettle for any purpose other than heating water.
9 Use the kettle only with the stand supplied (and vice versa).
10 This appliance must not be operated by an external timer or remote control system.
11 Don't operate the appliance if it's damaged or malfunctions.
12 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
C FILLING
1 Remove the kettle from the stand.
2 Press the lid lock to open the lid.
3 Fill with at least 2 cups of water, but not above max.
4 If you overfill, the kettle may spit boiling water.
5 Close the lid, and press down to lock it.
C SWITCHING ON
6 Plug the stand into the wall socket.
7 Put the kettle on the stand.
8 Move the switch to 1. The light will come on, and the kettle will heat up.
household use only
2

Advertisement

Table of Contents
loading

Table of Contents