Care And Maintenance; Environmental Protection; Instructions - Russell Hobbs 18534-70 Instructions Manual

• You may see some discolouration on the floor of the kettle. Again, don't worry – it's due to the
bonding of the element to the kettle floor.
USING WITH INSUFFICIENT WATER
• This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
• You must then remove the kettle from its stand to reset the cut-out.
• Sit the kettle on the work surface till it's cold.

CARE AND MAINTENANCE

1. Unplug the appliance and let it cool.
2. Wipe all surfaces with a clean damp cloth.
3. Open the lid.
4. Put a finger into the spout, and press the hook on top of the filter down and back, into the kettle.
5. Lift the filter out of the kettle.
6. Rinse the filter under a running tap while brushing with a soft brush.
7. Fit the the bottom of the filter into the slot at the bottom of the spout
8. Press the filter towards the spout, to lock the hook into the top of the spout.
9. Close the lid.
Descale regularly, (at least monthly).
Use a proprietary descaler. Follow the instructions accompanying the descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
W

ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical and electronic
goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but
recovered, reused, or recycled.
4