Download Print this page
Russell Hobbs 18089 Instructions
Russell Hobbs 18089 Instructions

Russell Hobbs 18089 Instructions

Advertisement

Quick Links

27 Slide the filter down into the guides.
28 Replace the lid.
D WIRING UK PLUGS
The product must be earthed. It
has a 13A BS1362 fuse in a 13A
BS1363 plug. To replace the plug,
fit the green/yellow wire to E or E,
the blue wire to N, and the brown
wire to L. Fit the cord grip.
If in doubt, call an electrician.
Don't use a non-rewireable plug unless the
fuse cover is in place. If you remove the plug,
dispose of it.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems
due to hazardous substances in electrical and
electronic goods, appliances marked with
this symbol mustn't be disposed of with
unsorted municipal waste, but recovered,
reused, or recycled.
S SERVICE
If you ring Customer Service, please have the
Model No. to hand, as we won't be able to
help you without it. It's on the rating plate
(usually underneath the product).
The product isn't user-serviceable. If it's not
working, read the instructions, check the plug
fuse and main fuse/circuit breaker. If it's still
not working, consult your retailer.
If that doesn't solve the problem – ring
Customer Service – they may be able to offer
technical advice.
If they advise you to return the product to us,
pack it carefully, include a note with your name,
address, day phone number, and what's wrong.
If under guarantee, say where and when
purchased, and include proof of purchase (till
receipt). Send it to:
Customer Service
Spectrum Brands (UK) Ltd
Fir Street, Failsworth, Manchester M35 0HS
email: service@russellhobbs.com
telephone: 0845 658 9700 (local rate number)
E GUARANTEE
Defects affecting product functionality
appearing within two years of first retail
purchase will be corrected by replacement or
repair provided the product is used and
maintained in accordance with the instructions.
Your statutory rights are not affected.
Documentation, packaging, and product
specifications may change without notice.
I ONLINE
www.russellhobbs.co.uk for more products
instructions

Advertisement

loading

Summary of Contents for Russell Hobbs 18089

  • Page 1 27 Slide the filter down into the guides. S SERVICE 28 Replace the lid. If you ring Customer Service, please have the D WIRING UK PLUGS Model No. to hand, as we won’t be able to help you without it. It’s on the rating plate The product must be earthed.
  • Page 2 6 Switch off before opening the lid. C GENERAL 7 Put the stand on a stable, level surface. 11 Pour slowly and don’t over-tilt the kettle. 8 Wind excess cable beneath the stand. 12 Don’t tilt the kettle backwards, water might 9 Don’t use the kettle without fitting the filter.