Water Separator Warning Indicator Blinks While Cruising - Yamaha F115 Owner's Manual

Trouble Recovery
the power trim and tilt / the power tilt because
of a discharged battery or a failure with the
power trim and tilt unit / the power tilt unit, the
engine can be tilted manually.
1. Loosen the manual valve screw by turn-
ing it counterclockwise until it stops.
1. Manual valve screw
2. Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU31780
Water separator warning indicator
blinks while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
G
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
G
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
G
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
G
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
80
which could result in a fire or explosion
hazard.
If the water separator warning indicator on
the tachometer blinks, perform the following
procedure.
1
ZMU03464
1. Water separator warning indicator
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler.
ECM01570
CAUTION:
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
1. Water detection switch coupler
4. Unscrew the filter cup from the filter
housing.
1
ZMU05480