Remote Transmitter Learn; Battery Replacement - Ultra Start 1270 series Install Manual

PAGE 23

Remote Transmitter Learn

STEP 1 - Within 3 seconds turn the ignition key to the "ON"
position three times leaving "ON" the third time.
STEP 2 - Press and hold the Program Button. The park
lights will turn "ON" and the siren will
chirp once. Continue to hold the Program
Button, the park lights will turn "OFF" and the
siren will chirp 5 times quickly.
NOTE: If the parking lights do not turn "ON", release the Program Button and
turn the ignition to the "OFF" position, wait 5sec and repeat steps 1 & 2.
STEP 3 - While holding the Program Button, press and release the
button on each of the remote transmitters to be programmed
NOTE: The system will respond with one chirp when a code is learned.

Battery Replacement

The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with a quality 23A 12volt Alkaline battery
(1-Way remote). Replace with a quality 1.5V battery (2-Way remote).
INSTALL GUIDE