Table of Contents
Advertisement
Quick Links
OWNER'S GUIDE
Covers All 430, 440, 441 and CJ Series
Advanced Security Systems
www.ultrastarters.com
FCC/ID Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance
void the user's authority to operate this devise.
Advertisement
Table of Contents
Related Manuals for Ultra Start 441 Series
Summary of Contents for Ultra Start 441 Series
- Page 1 OWNER’S GUIDE Covers All 430, 440, 441 and CJ Series Advanced Security Systems www.ultrastarters.com FCC/ID Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 2 - Car Finder. System Override Protection.(Service Mode) - Up to 3 Different Transmitter Codes. - Passive Arming/ Locks. - Selectable Siren/ Horn Output. (441 series ONLY) - Car Jack Mode. (CJ series ONLY) REMOTE VEHICLE SECURITY Page 2 Page 3...
-
Page 3: Car Finder
REMOTE VEHICLE SECURITY Alarm Functions 1. Press and release the 2. The park lights will flash and the siren will chirp one time. 3. The doors will lock (optional). NOTE: The LED will start flashing within five seconds. If installed, the starter disable will activate. -
Page 4: Service Mode
OWNER’S MANUAL PAGE 4 Service Mode 1. The system must be disarmed and the ignition is turned OFF. 2.Press and release the lock and unlock buttons at the same time, then press and hold the lock button for five seconds. 3.The system will respond with five chirps and park light flashes to confirm that the system is in Valet mode. -
Page 5: Transmitter Programming
REMOTE VEHICLE SECURITY Transmitter Programming Follow the steps below to program the transmitters to the system s memory Step 1 - Turn the Ignition key ON then OFF - Leaving Key Off. Step 2 - Press and release the Program Button twice then press and hold. Step 3 - The siren will respond with five chirps to confirm Transmitter Program Mode. -
Page 6: Passive Arming
OWNER’S MANUAL PAGE 6 Alarm Triggered 1.When the alarm is triggered by the door, hood, shock etc., the siren will activate in 60 second cycles. After 60 seconds the siren will turn off and the system will return to the armed state. 2. - Page 7 OWNER’S MANUAL REMOTE VEHICLE SECURITY PAGE 7 Notes...
- Page 8 OWNER’S MANUAL PAGE 8 WARRANTY The manufacturer warrants to the original purchaser of their remote starters and alarms, that the product shall be free from defects in material and workmanship. However, should this product be proven to be defective, within a two year period from the original date of purchase, the manufacturer will, without charge to the purchaser (excluding any charges incurred to have the product delivered to the manufacturer) , repair or replace any part of the remote starter and/or alarm which the manufacturer agrees to be defective.
Need help?
Do you have a question about the 441 Series and is the answer not in the manual?
Questions and answers