Ultra Start 1270 series Install Manual page 9

PAGE 9
Wiring Descriptions
AUXILIARY CONNECTOR (14 pin)
Pin
1-YELLOW
2-RED/
WHITE
3-BROWN
4-ORANGE
5-WHITE/
BLUE
6-N/A
7-PURPLE
8-WHITE
9-GREEN/
WHITE
10-GREEN
11-BLACK
12-PINK
13-BLUE/
WHITE
14-BLUE
Function
Re-arm(-) - 0.75 second pulse output when
pressed and after remote start shutdown.
Used for factory alarm re-arm.(menu 3)
Trunk Release(-) - Programmable output. Hold the
Dis-arm(-) - 0.75 second pulse when the
and before remote starter activation.
Used for factory alarm dis-arm.
Anti-Grind/Starter Kill(-) -Output active during remote start.
Horn(-) - Output to activate factory horn. (12xx/32xx series) or
Siren(+) - Output to activate external siren. (22xx/42xx series)
Door Pin(+) - Input to detect 12v when door is open.
Park Light(+) - 10amp positive output to activate park lights.
Hood Pin(-) - Input to detect ground when hood is open.
MUST BE CONNECTED.
Door Pin(-) -Input to detect (-) when door is open.
Ground(-) - System chassis ground input.
Brake Light (+) - Positive brake light switch input. Used to
Tach(A/C) - A/C Tach signal input. Used to detect engine
speed to indicate vehicle is running.
(Coil, Injector, cam/crank position sensors)
Diesel(+/-) - Programmable Wait to Start Input. Detects 12v or
negative signals.(menu 3)
Description
for 3 seconds, output will stay active (max
5 seconds) or programmable (-)park light.
Programmable Starter Kill (menu 3)
Programmable output (menu 2)
detect the brake switch being applied
INSTALL GUIDE
button is
button
button is pressed
.