Ultra Start 1270 series Install Manual page 21

PAGE 21
Menu 3- Starter Settings
Setting 5 Maximum Crank Time
1) 10 Seconds
2) 3 Seconds
*3) 5 Seconds
Press & Release the Program Button 5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 6 Anti-Grind/Starter Kill
1) Active 1 Flash/Chirp
2) Passive 2 Flashes/Chirps (-)When locked/30 seconds after ignition is OFF or #2 pressed
*3) GWR 3 Flashes/Chirps (-) Output during remote start only. (Anti-grind/ Bypass)
Press & Release the Program Button 6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 7 Safety Start
1) 2 Press 1 Flash/Chirp
*2) 1 Press 2 Flashes/Chirps
Press & Release the Program Button 7 Times (Setting 7) Confirmed with 7 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
1 Flash/Chirp
2 Flashes/Chirps
3 Flashes/Chirps
(-)When locked and during remote start (Anti-Grind).
(Not available on 3270/3265/4270/4265 series)
Must Press the
- continued
10 sec max time that the starter will stay engaged.
3 sec max time that the starter will stay engaged.
5 sec max time that the starter will stay engaged.
(14 pin auxiliary connector, pin 4)
button twice within 3 seconds to start.
Must Pres the button once to start.
INSTALL GUIDE
*(Default Settings)