Remote Transmitter Learn - Ultra Start 1270 Owner's Manual

PAGE 11

Remote Transmitter Learn

IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
STEP 1 - Within 3 seconds turn the ignition key to the "ON"
position three times leaving "ON" the third time.
STEP 2 - Press and hold the Program Button. The park lights will
turn "ON" and the siren or horn (optional) will chirp
once. Continue to hold the Program Button,
the park lights will turn "OFF" and the siren or
horn (optional) will chirp 5 times quickly.
NOTE: If the parking lights do not turn "ON", release the Program Button and
turn the ignition to the "OFF" position, wait 5sec and repeat steps 1 & 2.
STEP 3a (Default) - While holding the Program Button, press and
STEP 3b (PadLoc/ - While holding the Program Button, press and
2nd Car)* release the
PadLoc* is a safety feature that "LOCKS" the remote transmitter. To
"UNLOCK" the remote transmitter the
pressed simultaneously with the function chosen.
2nd Car* function allows the operation of two Ultra Start systems
(in two separate vehicles) with one remote transmitter.
Example: Press and release
NOTE: Some features not available with PadLoc* or 2nd car* mode.
release the
transmitters to be programmed.
transmitters to be programmed.
or
and
button on each of the remote
button on each of the remote
simultaneously to remote start.
*12xx and 22xx series ONLY
OWNER'S GUIDE
button must be