Interior Accessories And Space Distribution - Küppersbusch Upright refrigerator-freezer Instructions For Use Manual

Upright refrigerator-freezer
Hide thumbs Also See for Upright refrigerator-freezer:
Table of Contents

Advertisement

Interior accessories
and space distribution
Equipment depends on the model.
Shelves can be optionally placed on the guides
inside the appliance. They are protected against
pulling out completely by accident. To remove the
shelf, raise the back part level off and pull it out.
Quickly perishable food should be stored on the
back i.e. the coldest part of the shelves.
Certain models are equipped with wire bottle rack
which enables placing of bottles on the cork. It is
safeguarded against pulling out. It may be pulled
out only if empty, by lifting the front part and
pulling it towards you. Place the bottle rack in the
appliance in such way to avoid obstruction of door
closing by the length of the stacked bottles.
Maximum load of the rack is 9 bottles of 0,75 l, or
13 kg of total mass - see label at the right side of
the interior of the appliance.
Crisp tray below the glass shelf at the bottom of
the refrigerator is used for storage of fruit and
vegetables. It retains the right level of moisture
and prevents drying out.
The inner refrigerator door consists of various
shelves or holders used for storing cheese,
butter, eggs, yogurt, and a stock of other smaller
packages, tubes, cans etc. The bottom shelf is
used for storing bottles.
The freezer door liner is also fitted with various
shelves or holders used for storing frequently
used frozen food - quick access (ice cream,
already opened packages of vegetables, etc.).
Fan (certain models only - located under the
ceiling or hidden behind rear panel of the
refrigerator, or concealed within the freezing unit)
improves even distribution of temperature and
reduced condensation on storage racks.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents