High Temperature Freezer Alarm; Digital Display; Intensive Freezing - Küppersbusch Upright refrigerator-freezer Instructions For Use Manual

High temperature
freezer alarm

Digital display

14

Intensive freezing

Use the rotating switch to select the freezer. By
short consecutive pressing of the knob E select
the intensive freezing option (SF) and wait for 5
seconds for the setting to be saved. Orange light (F)
is lit. If the setting is not switched off manually, it will
be switched off automatically after approximately
two days.
Use this option with the first start of the appliance,
before cleaning, and prior inserting large quantities
of fresh food into the freezer.
Sound alarm starts in case of excessively high
temperature of the freezer (intermittent beep), red
light (D) is flashing.
•
Alarm is switched of by pressing the knob C.
Red light goes off automatically when the freezer
is cooled sufficiently and there is no danger for
stored food to get foul.
•
If the temperature in the freezer is not at the level
required for the preservation of stored food, the
alarm will be switched on every 24 hours to alert
you of this condition.
•
At the first start of the appliance the alarm has a
24-hour temperature alarm delay, because the
freezer has not reached the required temperature
level. This prevents the unnecessary alarm
operation.
Indicates current temperature in the refrigerator
(positive single digit numeral), or in the freezer
(negative double digit numeral).
During the setting procedure the display flashes and
indicates momentary temperature setting. It also
flashes if the freezer temperature is so high that
there is danger for stored food to become foul.