Switching The Appliance On/Off; Temperature Setting - Küppersbusch Upright refrigerator-freezer Instructions For Use Manual

Switching the
appliance ON/OFF

Temperature setting

16
Before the first use of the appliance first plug the
power cable into the wall socket. Display indicates
dashes for both the refrigerator and the freezer.
•
Switch the appliance on/off by pressing the
button A for 3 seconds. Both the refrigerator and
the freezer are started, green signal lamps B
and D are on. In this mode you can switch off
the refrigerator only by pressing button C for 3
seconds (green signal lamp 2 is off).
•
Display indicates temperature in the refrigerator
+9°C and in the freezer 0°C. These values remain
on the display until the actual temperature within
the respective space falls below these values.
•
The appliance has been preset in the factory to
the recommended temperatures of the refrigerator
to +5°C and freezer to -18°C.
Temperature setting range of the refrigerator:
+1°C do +9°.
Temperature setting range of the freezer:
-16°C do -24°C.
•
Freezer temperature is set by pressing button K,
and refrigerator temperature by pressing button
M.
•
After pressing the temperature setting button
the display starts flashing and indicates the last
selected setting.
•
Temperature setting is changed by short
consecutive pressing of the button in 1°C steps.
During the setting procedure all other buttons are
idle.
•
Approximately 5 seconds after the setting button
is released the display indicates the actual
temperature.