Receipt Header And Footer - Olivetti ECR 6800 User Manual

Example: Enter the word BOOKS.
Type/Press:
O
B
K S
Using the Character Table
The Character Table provides all the letters and symbols that
your cash register is capable of printing.
To use this table, with reference to figure 7:
• First look for the letter or symbol wanted and then identify
its corresponding alphanumeric key listed in the first
column on the left.
• Press the alphanumeric key on the keypad the number of
times needed to select the character by reading the
number on the row at the top of the table.
• Confirm your final caption by pressing
NOTE: Special accented national letters are not displayed.
Example: Select the letters L and Ü.
Type/Press:
L
Ü

Receipt Header and Footer

By default your cash register prints a header on all customer
receipts when the control key is in the REG position. It can
also print a personalized footer, if you program one.
The receipt header can consist of up to 6 lines of 24
characters each, the footer up to 4 lines of 24 characters
each. You can change the cash register's default header or
the programmed footer by using the numeric keypad and/or
Character Table to enter the characters.
1. Control key position: PRG.
2. Press repeatedly until the message "HD1" is
displayed indicating the first line of the receipt header, or
"FT1" indicating the first line of the receipt footer.
3. Press repeatedly until the line number of the header
or footer line you want to personalize is displayed on the
left-hand side of the operator display.
4. Enter the letters or characters of the string you wish to
define and then press
O
.
Ü
.
5. Repeat steps 3 and 4 if you wish to program the remaining
programmable header or footer lines.
6. Press to exit.
Example: Change the third line of the default header to
PLEASE COME AGAIN using the Character Table.
Type/Press:
Switch to Recipt header
definition mode
P L
S
C O
A
E
I N
Confirm entered Exit
header
Receipt header line selection
E A
E
M
G A
7