Table of Contents
Advertisement
Setting the Date
Proceed as follows to set the current date:
1. Slide the control switch to the PRG position.
2. Type the [numeric keys] representing the current date. Remember to
use the DDMMYY format. Single digit numbers for months and days
must be preceded by a zero (0). Press the [#/NS] key to store the
date.
3. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example: Set a date of May 19, 2004.
Type/Press:
[190504] + [#/NS]
NOTE: If you wish that the date just entered be printed in the month/day/
year format, type [70] and then press the [RA/FC] key.
Setting the Time
Proceed as follows to set the correct time in the hour:minutes format:
1. Slide the control switch to the PRG position and type the [current
time] using the HH:MM format.
NOTE: Time is set according to international, or military time
(24-hour clock format). To correctly enter this time, simply add
12 to all hours in the PM. For example, to set the time to 9:00
AM, type [0900]; to set the time to 2:15 PM, type [1415].
2. Press the [Qty/Time/DW] key to store the entered time.
3. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example: Set the time at 3:30 PM.
Type/Press:
[1530] + [Qty/Time/DW]
NOTE: If you wish that the time just entered be printed and displayed in
the 24-hour format, type [40] and then press the [RA/FC] key.
6
Receipt Header
Your cash register is programmed to print a courtesy header on all
customer receipts when the control switch is in the REG2 position. With
the control switch in the REG1, X, Z and PRG positions, the header will
not be printed.
NOTE: You can change the programmed language in which the cash
register prints the header on the customer receipt and journal
record. Refer to the section Programming System Options of the
User's Guide, Machine Condition 11, to see in which languages
the cash register can print the receipt header.
The receipt header can consist of up to 4 lines of 24 characters each.
You can change the cash register's default header according to your own
business needs by using the numeric keypad and/or Character Table to
enter the characters for your new header.
Personalizing the Receipt Header
Proceed as follows to change the default receipt header:
1. Slide the control switch to the PRG position.
2. Switch the cash register to the receipt header definition mode by
pressing the [#/NS] key repeatedly until displaying the message "H01"
indicating the first line of the receipt header.
3. Select the receipt header line that you wish to personalize by pressing
the [Department 1/9] key repeatedly until displaying the desired line
number on the left-hand side of the operator display. Remember that a
total of four header lines can be personalized. You can scroll backward
through the receipt header lines by pressing the [Department 5/13]
key repeatedly.
4. Using the alphanumeric keypad and Character Table, enter the letters
or characters of the string you wish to define and then press the
[Check] key. This new line is automatically printed. Remember that
the receipt header can be up to 24 characters long. If you wish to
center a writing, you will need to calculate the empty character spaces
before and after your string.
5. Repeat steps 3 and 4 if you wish to program the remaining three
programmable header lines.
Advertisement
Table of Contents
