Preparing To Install The Refrigerator - GE Profile 28 Owner's Manual

Preparing to install the refrigerator.

Read these instructions completely and carefully.
Leveling Rollers
The rollers have 2 purposes:
1
The rollers can be adjusted so the refrigerator is firmly positioned on the
floor and does not rock back and forth.
2 Rollers allow you to move the refrigerator away from the wall for cleaning.
To adjust the rollers, remove the base grille by pulling it out at the bottom.
Turn the two front roller adjusting screws clockwise to raise the refrigerator,
counterclockwise to lower it. Use a 3/8 socket wrench, adjustable wrench
or pliers.
Front Roller
Adjusting Screw
Built-In Style models also have rear adjustable rollers so you can align the
refrigerator with your kitchen cabinets. Use a 5/16 socket wrench to turn the
screws for the rear rollers— clockwise to raise it, counterclockwise to lower it.
24
Rear Roller Adjusting Screw
(on Built-In Style models only)
Use this screw if the refrigerator
has one.
Front Roller
Adjusting Screw
Rear Roller Adjusting Screw
(on Built-In Style models only)
Use this screw if the refrigerator does
not have the screw pictured to the left.