GE Profile 28 Owner's Manual page 29

Ge refrigerators sidebyside owner's manual 24 built-in style, 28 and 30
Hide thumbs Also See for Profile 28:
Table of Contents

Advertisement

Available languages

Available languages

5
Install the Side Trim.
These pieces are tucked inside the fresh food door handle.
Do not remove the protective film on the outside of the Side Trim until the Side Trim is installed.
Fit the bottom of the Side Trim under the Bottom Trim as illustrated.
Hold the Side Trim against the front face of the decorator panels and fit the
Side Trim under the Top Trim. Make sure the Side Trim is fitted correctly and
that you are satisfied with the appearance of all the parts before pulling the blue
tape liner.
6
Secure the Side Trim.
Place one hand between the two blue pieces of tape liner and hold the Side Trim
firmly against the panels and the side of the door.
Pull the top blue tape liner up about 3 (80 mm), pressing the trim with your
hand as the adhesive is exposed to the door. Then pull the bottom blue tape
liner down about 3 (80 mm). Follow the tape with your hand, pressing the trim
adhesive against the door.
Continue pulling the tape liner loose, alternating between the top and bottom
and pressing the Side Trim against the door.
7
Remove the Protective Film From the Outside of the Side Trim.
Top Trim
Side
Trim
Side
Trim
Bottom Trim
Blue Tape
Liner
Blue Tape
Liner
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profile 24Profile 30

Table of Contents