Decorator Panels - GE Profile 28 Owner's Manual

Installing and removing previously installed

decorator panels.

Read these instructions completely and carefully.
Removing the Handles
In order to remove the decorator panels and replace with new panels you need to
remove the handles. A T-20 Torx driver is needed.
1 Loosen and remove the 2 screws in the Top Trim.
2 Loosen and remove the 2 screws in the bracket that attaches the Handle to
the top of the Door.
3
Grip the Handle firmly and slide upwards. The keyhole slots on the Handle
slide off the buttons on the door.
4 Open the door and slide out the decorator panels.
30
Top Trim Screws
Buttons
Button
Bracket Screws
Slots
Slot