Table of Contents
Advertisement
Note! You can only gain control by pressing the Lock button if the Lock LED is
currently not blinking.
Re-pressing the Lock button at either position releases control and the Lock LEDs
turn off.
8.1 Keyboard hotkeys
To toggle between the Transmitter and the Receiver position, press: Caps Lock twice,
release, then press C.
To turn the beeper sound on/off, press: Caps Lock twice, release, then press B.
8.2 Adjusting the picture
At the Receiver, you can adjust the picture quality using a small screwdriver to turn
the Luminance and Equalization Picture adjusters located on the Receiver's rear
panel.
9 . S a f e t y
The device must only be opened by an authorized Minicom technician. Disconnect
device from AC mains before service operation!
9.1 User guide feedback
Your feedback is very important to help us improve our documentation. Please email
any comments to: ug.comments@minicom.com
Please include the following information: Guide name, part number and version
number (as appears on the front cover).
9.2 WEEE compliance
WEEE Information for Minicom Customers and Recyclers
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Minicom they are entitled to:
Send old equipment for recycling on a one-for-one, like-for-like basis (this
varies depending on the country)
Send the new equipment back for recycling when this ultimately becomes
waste
Instructions to both customers and recyclers/treatment facilities wishing to obtain
disassembly information are provided in our website www.minicom.com.
QUICK START GUIDE
6
Advertisement
Table of Contents
