Connecting The System Cable; Connecting To The Power Supply - Tripp Lite 0DT60001 Quick Start Manual

5.3 Connecting the System cable

Connect the System cable CAT5/6/7 FTP cable to the System ports of the Transmitter
and Receiver.

5.4 Connecting to the power supply

The Transmitter receives its power from the connected computer and does not
generally need an external power supply. However, when the Transmitter is connected
to a KVM switch it may need an external power supply. Use a Minicom Power
adapter 12VDC 1A, ordered separately p/n
Connect the Receiver to the power supply with the Power adapter and cord provided.
6 . E x t e n de r s ys t e m w i t h o pt i o na l c om p ut e r a t
R e c e i v e r p os i t i o n
You can connect a computer to the Receiver position. The Receiver position can then
either control the local computer or the Transmitter position computer.
Optional PC
Extended User
position
Figure 7 Extender system with optional computer at Receiver position
The connections are the same as outlined above, with the addition of a
computer connected to the Receiver as follows:
6.1 Connecting a computer to the Receiver
Connect a VGA + USB cable to the Receiver and a computer. Connect the HD15
connector to the Receiver Computer port and connect the VGA and USB connectors
to the computer Monitor and USB ports.
QUICK START GUIDE
5
CAT5 cable - 150m/500ft
Receiver
4
PSA70020.
Local User
position
Transmitter