Operating The Smart Cat5 System; The Keyboard Hotkeys; Displaying The Osd - Tripp Lite 116 User Manual

4 . O pe r a t i n g t he S m a r t C AT 5 s ys t e m
Switch between the connected computers by either

The front panel Select buttons

Keyboard hotkeys

The OSD (On Screen Display) or Control software
The OSD is also the place to adjust various settings as explained below.
When switching computers the illuminated LED of the top bank indicates which
computer is currently selected.

4.1 The keyboard hotkeys

To switch to the next computer forwards press Shift then, +. Release Shift, before
pressing +.
To switch to the next computer backwards press Shift then, -. Release Shift, before
pressing -.
Note! With a US English keyboard you can use the + key of the alphanumeric section
or of the numeric keypad. With a Non-US English keyboard only use the + key of the
numeric keypad.

4.2 Displaying the OSD

To display the OSD:
Press Shift twice. The OSD Main window appears. See Figure 13. Lines with yellow
text show active computers. Lines with blue text show inactive computers.
The Type column indicates whether a computer "C" or another switch "S" is
connected to the port.
USER GUIDE
14