Subscribe to Our Youtube Channel
Related Manuals for Pyle PT270AIU
Summary of Contents for Pyle PT270AIU
- Page 1 300 Watt Stero Receiver AM-FM Tuner, USB/SD, Ipod Docking Station & Subwoofer Control PyleAudio.com www.PyleAudio.com 718.535.1800 718.236.2400(fax) 1600 63rd Street, Brooklyn NY 11204 PT 70AIU...
- Page 2 PT270AIU PT270AIU Foreword Thank you for purchasing this Pyle Pro amplifier. Please read Precautions these operating instructions carefully before use. They will acquaint you fully with its features. This product adopts highly advanced digital techniques, high l.Power sou rce-The unit shoul d be conne cted to a power supply AC-llO/60Hz, powered, four-channel outputs to be the media center of your AC-220V/50Hz.
- Page 3 PT270AIU PT270AIU 1 23 4 56 7 89 10 ..Technical Specifications Technical PT270AlU Main Channel Power Output PMPO.8 Ohms. 1KHz test 300WX2 THD(1KHz) <1% Normal Load Impedance 80hm Input Sensitivity Impedance 17 16 400mV/33k Ohm CD/DVD AUX Microphone 6mV/600 Ohm 1.
- Page 4 PT270AIU PT270AIU 1.AUXlUSB AUX/USB Selector 2.CDDVD CD DVD Selector 3.TUNER - - - TUNER Selector 4.AUTO Automatically search the single source when power on 5.IPOD/MP3 - - - IPODIMP3 Selector 6.AUTOSCAN AMlFM auto scan selector scan and store stations automatically. Can store SO statioDS =-- - , 7.MEMORY...
- Page 5 PT270AIU PT270AIU SAFETY INSTRUCTIONS Make sure that all connections are properly connected and the main 2MIC g,poDor volume is setto minimum level before turning on the unit. AM ANTENNA .. PUTS MP3;npu' 2. When more then one pair of speakers are used, (specially the main...
Need help?
Do you have a question about the PT270AIU and is the answer not in the manual?
Questions and answers
I have an old Bang & Olafson turntable that I have tried to connect to my Pyle Amp, but it does not work. help. What can I do?
To connect a Bang & Olufsen turntable to the Pyle PT270AIU amplifier:
1. Locate the Audio Output on the Turntable: Identify the RCA output jacks (typically red for right and white for left) on the turntable.
2. Connect to the Audio Input Jacks on the Amplifier: Use an RCA cable to connect the turntable's output jacks to the "AUDIO INPUT JACKS" on the back panel of the PT270AIU amplifier.
3. Use a Phono Preamp (if needed): If the turntable does not have a built-in preamp, you will need to connect the turntable to a separate phono preamp before connecting it to the amplifier. The preamp output should then connect to the amplifier's input jacks.
4. Set the Volume and Test: Turn on the amplifier, select the appropriate input source, and adjust the master volume.
This answer is automatically generated