Installing Batteries - HoMedics BPS-060 Manual

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover towards
you to open the battery compartment.
2. Install or replace 4 "AA" sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Replace the battery cover by clicking in the bottom
hooks first, then push in the top end of the battery
door.
BPS-060_B.indd 13-14 BPS-060_B.indd 13-14
Battery
Cover
11
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only
1.5V AA alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of
them together with the household garbage.
12
5/01/10 1:27 PM 5/01/10 1:27 PM