Compliance And Markings - Agilent Technologies N4010A Getting Started Manual

Regulatory Information

Compliance and Markings

Compliance and Markings
Electromagnetic Compatibility (EMC)
This product conforms with the protection requirements of European Council
Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the technical
Construction file route to compliance, using EMC test specifications EN
55011:1991 (Group 1, Class A) and EN 50082-1:1992.
In order to preserve the EMC performance of the product, any cable which becomes
worn or damaged must be replaced with the same type and specification.
10 Base-T LAN Connection Radiated Emissions:
To ensure compliance with EN 55011 (1991) a screened category 5, STP patch lead
(RJ45 cable) should be used to connect the LAN port.
Safety
This Test Set has been designed and tested in accordance with publication
EN61010-1(2001) / IEC 1010-1(2001) / CSA C22.2 No. 61010-1-04 Safety
Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use, and has been supplied in a safe condition. The instruction documentation
contains information and warnings which must be followed by the user to ensure
safe operation and to maintain the Test Set in a safe condition.
Markings
The following markings can be found on the rear panel.
ICES/NMB-001
44
The CE mark shows that the product complies with all the relevant European
legal Directives.
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Chapter 3