Table of Contents
Advertisement
Standard Installation Instructions
D
Replacing the Oven Door
NOTE: The oven door is heavy. You may
need help lifting the door high enough to
slide it into the hinge slots. Do not lift the
door by the handle.
Lift the oven door by
D8
placing one hand on
each side. The door is
heavy, so you may need
help. Do not lift the door
by the handle.
With the door at the same angle as
D9
the removal position (halfway between
the closed and broil stop position,
seat the notch of the hinge arm into
the bottom edge of the hinge slot.
The notch of the hinge arm must be
fully seated into the bottom of the slot.
Bottom Edge
of Slot
Open the oven door as far as it
D10
will open.
Installation Instructions
Hinge Arm
Hinge Notch
Push the hinge locks up against the
D11
front frame of the oven cavity, to the
locked position.
Notch of Hinge
Securely Fitted into
Bottom of Hinge
Slot
Close the oven door.
D12
Check for Proper Installation of
D13
Anti-Tip Bracket
Lower the oven door and gently apply
medium force at the handle end until
movement of the range is detected. Con-
tinue pressing until the anti-tip bracket is
engaged and movement stops. A small
amount of movement is acceptable at
the back of the range top, but it should
be stable and not tip once the anti-tip
bracket is engaged.
12
cont.
Hinge in
Locked Position
Advertisement
Table of Contents
