GE PD900DPBB - Profile 30 in. Drop-In Electric Range Dimensions And Installation Information

PD900DP
GE Profile 30" Drop-In Electric Range
™
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to slide-in ranges must have an
KW Rating
adhesion spec of at least 194° temperature rating.
240V 11.6
Note: To reduce possibility of scorching the side walls above the
208V
8.7
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
Breaker Size
possible extended, high-heat, element operation.
240V 40 Amps
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
208V 40 Amps
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is installed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32BB (Black) - 4" High
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
Rear Filler Strip
WB07T10680 - Black Filler Strip Assembly
WB07T10681 - White Filler Strip Assembly
WB07T10682 - Bisque Filler Strip Assembly
Installation information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
geappliances.com or call GE Answer Center
service, 800.626.2000.
or
™
®
30
24
2-7/8"
To Front Surface
of Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
Above illustration intended for dimensional reference only.
Refer to photograph for actual product appearance.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
2-7/8"
required step in the installation
To Front Surface
of the range.
of Countertop
7-1/2
Accessory
Backguard
A/B*
31-1/4
27
26-1/2**
*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)
**Total depth from wall to
front of closed oven door
including handle is 29-1/2.
30" Min.
6" Min.
from walls
30" Min.
Acceptable Electrical Outlet
23-3/16
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
27-1/2
36
7-1/2
30
24
31-1/4
Listed by
Underwriters
Laboratories
Specification Revised 1/11
20-5/8" Door
Clearance
From Front
Surface of
15" Min.
25
Accessory
Backguard
A/B*
27
220804