Problem Solver - GE JMP28 Use And Care Manual

PROBLEM
"BURNING" OR "OILY"
FROM OVEN WHEN
TURNED ON
OVEN TEMPERATURE
TOO HOT OR TOO COLD
CONTROL BEEPS AFTER
ENTERING OVEN TIME
OR STOP TIME
OVEN NOT CLEAN
CYCLE
AFTER CLEAN
If you need more help...call, toll free:
GE Answer Center"
800.626.2000
consumer information service
30

PROBLEM SOLVER

(continued)
POSSIBLE CAUSE
This is normal in a new oven and will disappear in time. To speed the process,
set a self-clean cycle lasting for a minimum of 3 hours.
See the Operating the Self-Cleaning Oven section.
An odor from the insulation around the inside of the oven is normal for the first
few times the oven is used. This is temporary.
Oven thermostat needs adjustment. See the Adju:jt the Oven Thermostat—
Do It Y(~ursevseCtion.
. This is reminding you to enter a bake temperature.
Oven
controls not set properly.
Heavily soiled ovens require 3 Y? to 4-hour clean time.
Heavy spillovers should be cleaned up before starting clean cycle.