GE JGSP32 Use And Care Manual page 28

How to Set Delay Start of Cleaning
Quick Reminder:
1. Press the AUTO SELF CLEAN
2. Press the INCREASE or D= REASE
until the desired Clean Time appears.
3. Press the STOP TIME pad.
4. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow the directions in the Before a Clean
Cycle section.
SELF CLEAN pad.
CLEAN
A
3. Press the INCREASE or DECREASE
pad to enter Clean Time.
4. Press the STOP TIME pad. "STOP
TIME" and the earliest Stop Time you
can set will appear in the display.
A
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If the
Clean Time is three hours and the time of day is 6:W,
the Stop Time that appears in the display will be 9:W.
28
pad.
6. When the LOCK light is oft.. open the d(](}r.
NOTE:
A fan may automatically turn (In and ot~ to cool"
5. Press the INCREASE pad tu change the
Stop Time to a later time of day if
desired. For example: If you set Stop
Time at 11 :(X), oven will start clean
cycle at 8:(X) and end at 11 :W. The door"
latches automatically.
When the time of day reaches the autt)matic stafl
time, CLEAN, ON and LOCK appear in the display.
During a delayed self-clean operatit)n
AUTO SELF
you can find (]ut when the oven is set to
CLEAN
turn on by pressing and holding the
A
AUTO SELF CLEAN pad for 3 sccunds.
internal parts. This is normal, and the fun may
continue to run after the t~ven is turned ofl..